HOME FAQs BOOKS JOBS: Help Wanted Suggestions you are here: Hotline/Forum => Letter 27019

Nickel Brush Plating

++++

Looking for nickel Brush Plating Services in the New England area for approx. 100 pcs. of carbon steel castings. Looking for approx. .002 buildup in a .875 keyway.

Ron Belanger
Gear MFG - New Hartford, CT, USA

Dear Reader: this particular letter is a commercial inquiry, so there is no provision for public reply. Public input is very welcome on the majority of our tens of thousands of inquiries though.

Post a new question or inquiry on a different subject.

Disclaimer: It is not possible to diagnose a finishing problem or the hazards of an operation via these pages. All information
presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The
internet is largely anonymous; some names may be fictitious and some recommendations may be deliberately harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: