HOME FAQs BOOKS JOBS: Help Wanted Suggestions you are here: Hotline/Forum => Letter 27012

Seeking blaster/stripper for Aluminum Body Panel from a '71 Land Rover

++++

Hi,

I need the body panels from a 1971 Land Rover stripped. My local media blaster doesn't feel comfortable blasting the aluminum. Are there any chemical or specialty blaster services in the Long Island area. I'd be willing to travel depending on the length of time the job would require. Thanks.

Michael Williams
Consultant - St James, New York

----
Readers: This site is made available for camaraderie & technical info exchange by our supporting advertisers, and they will contact the inquirer privately regarding their commercial needs. Please offer comments on any technical issues, but not sourcing suggestions or testimonials. Thanks!

ANSWER or FOLLOW UP POST an unrelated QUESTION HOT Topics

Disclaimer: It is not possible to diagnose a finishing problem or the hazards of an operation via these pages. All information
presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The
internet is largely anonymous; some names may be fictitious and some recommendations may be deliberately harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: