HOME FAQs BOOKS JOBS: Help Wanted Suggestions you are here: Hotline/Forum => Letter 26077

Semicon mfgr. wants comparison of the various mold release coatings

+++

Greetings!

I'm an engineer working on mold process in a semicon company. we experience some mold sticking of mold compound in mold chase. I just want to know the difference of these three different mold chase coatings: chrome, titanium nitride, and Cr-flon nano plating in terms of coefficient of friction, grainsize, wear resistance, adhesion/releasability from epoxy mold compound, hardness and roughness.

What I mean of difference between those properties are some data you've acquired like say coeffient of friction of chrome ____value, titanium nitride ___value, cr-flon__value, and other properties as well.

Thank you very much

Ken So
semicon process engg - Sta. Rosa, Laguna, Philippines

ANSWER or FOLLOW UP POST an unrelated QUESTION HOT Topics

Disclaimer: It is not possible to diagnose a finishing problem or the hazards of an operation via these pages. All information
presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The
internet is largely anonymous; some names may be fictitious and some recommendations may be deliberately harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: