finishing.com logo ips1
HOME FAQs BOOKS JOBS: Help Wanted Suggestions      you are here: Hotline/Forum => Letter 25065

Plating copper buss bars

+++

I am a process engineer for a company that produces energy controls and surge protection devices. We are designing a series of copper buss bars to be used in one of our applications. The copper bar is 0.375" wide x 0.125" thickness consisting of various lengths. I am looking for a relatively inexpensive method for protecting these from corrosion. Our plating vendor suggested yellow chromate while a fellow engineer suggested bright dipping them. Are there any other reasonable methods I should look into?

Domnic Grujic
Engery controls, surge protection devices - Chicago, Illinois, USA


+++

BRIGHT DIPS PROVIDE VERY LITTLE CORROSION PROTECTION. YELLOW CHROMATE IS VERY GOOD. SOME NICKEL PLATE COPPER BUSS BARS FOR CORROSION PROTECTION.

Don Baudrand
Don Baudrand, Consultant
 
Poulsbo, Washington


ANSWER or FOLLOW UP POST an unrelated QUESTION HOT Topics

Disclaimer: It is not possible to diagnose a finishing problem or the hazards of an operation via these pages. All information
presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The
internet is largely anonymous; some names may be fictitious and some recommendations may be deliberately harmful.

If you are seeking a product or service related to metal finishing, please check these Directories:

Jobshops Capital Equip. & Install'n Chemicals & Consumables Consult'g, Train'g, Software Environmental Compliance Testing Svcs. & Devices Used & Surplus


Home    -    Contact    -    ©1995-2012 finishing.com     -    Privacy    -    Search