HOME FAQs BOOKS JOBS: Help Wanted Suggestions you are here: Hotline/Forum => Letter 25063

Information Required on Nano-scale Diamonds in Plating

+++

I have read an article in an engineering magazine regarding the application of nano-scale diamonds to machine parts undergoing chrome plating. This is to extend the life of the parts by adding diamond as part of the plating process to embed the diamonds in the metal plating. Does anybody have any further information on this subject? Are there any similar processes which would cost less?

Mandy Bailey
Pump Manufacturer for Oil Industry - Manchester, England, United Kingdom

+++

Diamond particles can be encapsulated in chromium plating as well as electrolytic or electroless nickel plating. I imagine that other metals could be used as the binder as well, although these are the only three that I have heard of.

A starting point for the chromium plating with diamonds would be Dr. Ned Mandich who has published papers on this. A starting point for the nickel plating with diamonds would be Surface Technology; their founder, Dr. Nate Feldstein (dec.) was probably the principal developer of the technology.

Ted Mooney, P.E.
finishing.com
Brick, New Jersey

ANSWER or FOLLOW UP POST an unrelated QUESTION HOT Topics

Disclaimer: It is not possible to diagnose a finishing problem or the hazards of an operation via these pages. All information
presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The
internet is largely anonymous; some names may be fictitious and some recommendations may be deliberately harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: