|
|
|
![]() |
Letter 24937 Why Noxon Brass and Silver Polish (and Quick Dip) Disappeared+++ Regarding Noxon Brass & Silver Polish inquiries from Sally Chamberlain - Boulder CO (.) ["I've been looking for Noxon Silver Dip too, and can't find it. It works wonderfully..."] and Sandy Beagle, Beiseker, Alberta (+) [Quick Dip Silver Cleaner....I have been trying to find this ... in Calgary... (Made by) Boyle Midway...] I have a bottle left over from the late Sixties of the Noxon product, and traces of the dip cleaner in a blank container. I forget its name, but Quick Dip sounds right. In 1973 I did a comparison between Noxon and Brasso (a good Canadian product) and found that Brasso [link is to product info at Amazon] was superior in every aspect to Noxon. Consequently, I ceased using the Noxon, which explains why I have my last can to this very day. Brasso works by dissolution and abrasion, forming ammonia complexes with the tarnishing material, which its abrasive additive then removes easier than it would the pure tarnish. A water soluble oil then fills in the micro scratches to prevent them from immediately beginning to oxidize. Noxon worked much the same way, but had a lower content of both abrasive and ammonia, and took more effort to achieve the same results Brasso would deliver. Their thiourea product (the silver dip) also had a successful competitor which is happily still in production. It is called "Twinkle" and is distributed in USA by the Drackett Products Company, Cincinnati, OH 45232-1988, phone 1-800-632-1684. It is a paste that's apparently almost all thiourea with perhaps a carrying agent. It is much more concentrated than any of the dips, needing only to be applied with an included sponge. It acts immediately to restore the shine. Should someone prefer a dip, dissolving some Twinkle in water will suffice but probably limit the shelf life. I did this experiment but went back to the paste. None of the thiourea products will produce quite the polish of Brasso, but they are easier to apply by perhaps two orders of magnitude. With "Twinkle" and "Brasso" on the market, Noxon was doomed. I, too, hate to see a product disappear (Especially such as Antique Care, a furniture polishing oil that had no peers, and which I miss terribly! Anyone know about it?), but in the case of Noxon I hardly noticed. I checked the hobbyist circle just below, but I used to make and sell the Texas Native Inertia Nutcracker. I retired from industry and am now chief judge of the municipal and magistrate courts of Columbus, Georgia. I still, however, keep a sharp eye on surface finishing products. Thanks for an excellent and most informative website! Haywood Turner ----
++++ Brasso is used by the military every day because it is one of the polishes that tarnishes so fast, that they can see a difference. National Motor Museum, National Railway Museum and a host of other Don't use Brasso, or Noxon come to that and polish once a year, what's wrong with that? Any polish that contains ammonia or anhydrous will dissolve zinc, a component of brass and bronze, to make it redden, (That's the copper being exposed) within a day or so of being applied. Steve Clark
April 14, 2006 Being in the electronics business, I have used Noxon Quik-Dip Silver Cleaner for years. I have found it works great for things OTHER than just silver. I have used it for cleaning corroded rotary switch contacts precious and non precious metal, tin plated pins etc and a host of other Non-silver items. Just dip the items and they come out bright shiney clean. Most of these small items do not lend themselves to cleaners in which you must physically rub and polish. Noxon Quik-Dip did it all, very well and without any effort. I cannot find any present day product on the market that comes even close to satisfying my needs. Such a pity Quik-Dip is no longer available. Mike Johnson
May 7, 2006 Try Goddard's silver dip which is available only in England [Ed. note: no, it's also available from this link at Amazon]. Richard Sage
Dear Reader, please --
![]() |
|
Save
This Page (why?) - Home - ©1995-2008 finishing.com