HOME
FAQs
BOOKS
JOBS: Help Wanted
Suggestions
you are here: Hotline/Forum =>
Letter 23074
Friction Coefficient
+++
I want to define the surface finishing of a pair of stainless steel plates so that they have a friction coefficient between 0.2 and
0.3. Do you have any data base for the relationship of the surface finishing and the friction coefficient?
John Eng
- Columbus, Ohio, U. S. A.
Disclaimer: It is not possible to diagnose a finishing problem or the hazards of an operation via these pages. All information
presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The
internet is largely anonymous; some names may be fictitious and some recommendations may be deliberately harmful.
If you are seeking a product or service related to metal finishing, please check these Directories: