HOME FAQs BOOKS JOBS: Help Wanted Suggestions you are here: Hotline/Forum => Letter 23041

Racking material for Nickel Sulphamate

+++

We have just started a Nickel Sulphamate line. We are developing the racking for some parts now. What is the best material to use in building racks to avoid having to strip them after plating and at the same time maintain good conductivity?

Jeff Parmenter
- Spanish Fork, Utah, USA

+++

The same as most other plating solutions, Jeff. Copper splines, stainless steel tips, the whole thing plastisol coated. There are several companies who specialize in building plating racks and the investment is worth it.
pic of Ted Mooney
Ted Mooney, P.E.
finishing.com
Brick, New Jersey

ANSWER or FOLLOW UP POST an unrelated QUESTION HOT Topics

Disclaimer: It is not possible to diagnose a finishing problem or the hazards of an operation via these pages. All information
presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The
internet is largely anonymous; some names may be fictitious and some recommendations may be deliberately harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: