HOME FAQs BOOKS JOBS: Help Wanted Suggestions you are here: Hotline/Forum => Letter 23033

HARD ANODIZING

+++

I'M STUDENT OF MS IN METALLURGY IN TEHRAN UNIVERSITY . I HAVE A PROBLEM ABOUT MY THESIS AND I NEED YOUR HELP. THE PROBLEM IS ABOUT HARD ANODIZING AT ROOM TEMPERATURE AND ALSO THE TEMP. SHOULDN'T INCREASE THAN 40^C. PLEASE HELP ME FOR CHEMICAL COMPOSITION OF BATHS THAT CAN PROVIDE THIS AIM. THANKS ALOT MHG.

M.H.GOOD
------ - TEHRAN, TEHRAN, IRAN

+++

Hello, Mr. Good. I think such additives are proprietary. Therefore, if anyone can reference a published article for you, that would be fine, but otherwise you would have to independently search the literature.
pic of Ted Mooney
Ted Mooney, P.E.
finishing.com
Brick, New Jersey

ANSWER or FOLLOW UP POST an unrelated QUESTION HOT Topics

Disclaimer: It is not possible to diagnose a finishing problem or the hazards of an operation via these pages. All information
presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The
internet is largely anonymous; some names may be fictitious and some recommendations may be deliberately harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: