HOME FAQs BOOKS JOBS: Help Wanted Suggestions you are here: Hotline/Forum => Letter 22088

Nickel plating equipment and chemistry

+++

Dear Sir,

We are a company working on rebuilding Liner Cylinders of GM Locomotive engines for Iran Railway. Recently we have decided to work on rebuilding the axles. (roller bearing axle journals which are grooved or undersize) This process is done by selective nickel electroplating. The maximum thickness of coating is 0.03 inch and the hardness should be minimum C50 Rockwell.

If you are willing to help us for providing the related equipment and solutions please inform us.

Best Regards,

Arezou Salehi
- Tehran, Iran

----
Readers: This site is made available for camaraderie & technical info exchange by our supporting advertisers, and they will contact the inquirer privately regarding their commercial needs. Please offer comments on any technical issues, but not sourcing suggestions or testimonials. Thanks!

ANSWER or FOLLOW UP POST an unrelated QUESTION HOT Topics

Disclaimer: It is not possible to diagnose a finishing problem or the hazards of an operation via these pages. All information
presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The
internet is largely anonymous; some names may be fictitious and some recommendations may be deliberately harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: