HOME FAQs BOOKS JOBS: Help Wanted Suggestions      you are here: Hotline/Forum => Letter 21090

---

Tin rolls of gauge 0.22 mm

+++

We are in need of tin plate of gauge 0.22 mm in the form of rolls. The monthly requirement will be of 8 to 10 tons. We would like to use this material in the manufacture of Mosquito coil stands.

A.V. PAVAN KUMAR
- HYDERABAD, ANDHRA PRADESH, INDIA

----
Readers: This site is made available for camaraderie & technical info exchange by our supporting advertisers, and they will contact the inquirer privately regarding their commercial needs. Please offer comments on any technical issues, but not sourcing suggestions or testimonials. Thanks!

ANSWER or FOLLOW UP POST an unrelated QUESTION HOT Topics

Disclaimer: It is not possible to diagnose a finishing problem or the hazards of an operation via these pages. All information
presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The
internet is largely anonymous; some names may be fictitious and some recommendations may be deliberately harmful.

If you are seeking a product or service related to metal finishing, please check these Directories:

Jobshops Capital Equip. & Install'n Chemicals & Consumables Consult'g, Train'g, Software Environmental Compliance Testing Svcs. & Devices Used & Surplus

Home    -    Contact    -    ©1995-2012 finishing.com     -    Privacy    -    Search