HOME FAQs BOOKS JOBS: Help Wanted Suggestions      you are here: Hotline/Forum => Letter 21017

---

Normes d'echantillonnage pour controle par attributs

+++

Je suis une etudiante en 2ème cycle en informatique.on m'a chargé de réaliser un projet sur "le controle de qualité " selon les normes française et americaine je vous serais trés reconnaissante si vous me donnez plus ample informations sur le sujet . J'attend votre réponse . Merci d'avance

Asmaa Benzidiya
- Casablanca, Maroc

---

+++

"Quality Control" is a topic covered by hundreds upon hundreds of different books. Check a couple out from your local library or buy one at Amazon. Good luck.

Ted Mooney, P.E. finishing.com Brick, New Jersey

ANSWER or FOLLOW UP POST an unrelated QUESTION HOT Topics

Disclaimer: It is not possible to diagnose a finishing problem or the hazards of an operation via these pages. All information
presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The
internet is largely anonymous; some names may be fictitious and some recommendations may be deliberately harmful.

If you are seeking a product or service related to metal finishing, please check these Directories:

Jobshops Capital Equip. & Install'n Chemicals & Consumables Consult'g, Train'g, Software Environmental Compliance Testing Svcs. & Devices Used & Surplus

Home    -    Contact    -    ©1995-2012 finishing.com     -    Privacy    -    Search