HOME FAQs BOOKS JOBS: Help Wanted Suggestions you are here: Hotline/Forum => Letter 21015

Needed - 5/16-18 aluminum hex socket cap screws

+++

Thanks in advance for any replies. I am in need of a small quantity of 5/16-18 aluminum hex socket cap screws. They need to be 6061, non-anodized. They will be used in a small production anodizing shop - used to plug drilled and tapped holes in aluminum blocks before anodizing. Anything from 50 to 100 pieces would suffice.

Thanks again,

Rick C [last name deleted for privacy by Editor]
- New Berlin, Wisconsin

----
Readers: This site is made available for camaraderie & technical info exchange by our supporting advertisers, and they will contact the inquirer privately regarding their commercial needs. Please offer comments on any technical issues, but not sourcing suggestions or testimonials. Thanks!

ANSWER or FOLLOW UP POST an unrelated QUESTION HOT Topics

Disclaimer: It is not possible to diagnose a finishing problem or the hazards of an operation via these pages. All information
presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The
internet is largely anonymous; some names may be fictitious and some recommendations may be deliberately harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: