finishing.com logo ips1
HOME FAQs BOOKS JOBS: Help Wanted Suggestions      you are here: Hotline/Forum => Letter 2038

White specking issue on galvanneal

--

I would like to know if anyone has ever seen the "white specking" problem on galvanneal surfaces? I have seen and know the corrective actions for this problem on zinc surfaces using a zinc phoshate coating. The question has to do with an iron phosphate coating on a galvanneal surfaces. Has anyone ever seen this and if so what corrective actions where implemented.

Terry Giles



--

Terry:

Dont' tell me you've never seen white rust before...


Craig Burkart
- Naperville, Illinois


+

White rust is a condition caused by water being pressure trapped in tension wrapped coils, can also be caused by moisture entering from outside walls after recoiling. To prevent chem.treat is applied before recoiling.

Alfred C. Blythe
- Burlington, Ont., Canada


ANSWER or FOLLOW UP POST an unrelated QUESTION HOT Topics

Disclaimer: It is not possible to diagnose a finishing problem or the hazards of an operation via these pages. All information
presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The
internet is largely anonymous; some names may be fictitious and some recommendations may be deliberately harmful.

If you are seeking a product or service related to metal finishing, please check these Directories:

Jobshops Capital Equip. & Install'n Chemicals & Consumables Consult'g, Train'g, Software Environmental Compliance Testing Svcs. & Devices Used & Surplus


Home    -    Contact    -    ©1995-2012 finishing.com     -    Privacy    -    Search