HOME FAQs BOOKS JOBS: Help Wanted Suggestions you are here: Hotline/Forum => Letter 2007
Plating facility design
--
We are a start-up metal finishing company. We are preparing to build a 16K Sq.Ft. facility. Our desire is to make best use of floor space available while incorporating all appropriate safeguards.
We are anticipating Rack and Barrel operations: Zinc will most likely be largest line. Other lines will include: Anodizing, Nickel, Electroless Nickel, Gold & Silver and perhaps Copper.
Steve Ritcheyplating shop - Santa Teresa, New Mexico
Hi, Steve: Please see the listing of finishing consultants. Also please read "Plating Shops for the 90's and Beyond". The Electroplating Engineering Handbook is a very good resource. Good luck.
|
 Ted Mooney, P.E. finishing.com Brick, New Jersey |
--
You might want to try getting in contact with some other finishers in your area. AESF Phoenix Branch (www.nasf.org) is the closest organized group. The yellow pages of the phone book is also a good source.
I have personally found that my fellow finishers at AESF meetings can help a lot by relating (and showing in person) how their shops work. They can also recommend reliable vendors for engineering services and plant equipment.
|
Bill Vins microwave & cable assemblies Mesa (what a place-a), Arizona |