HOME FAQs BOOKS JOBS: Help Wanted Suggestions you are here: Hotline/Forum => Letter 20099

90% glossy sheen using PU clear coating on wood

+++

A related question on obtaining glossy finish.

I need to finish 4.5' diameter table tops to a similar 90% glossy sheen using Polyurethane clear finish. The quantity I am working on is 100 table tops and I hardly have enough time to complete this project. What would be a time saving accelerated process?

..and what exactly are mineral spirits [linked by editor to product info at Amazon] used for wet sanding? could you please name some commonly available mineral spirits (turpentine?)?

Thanks very much in anticipation,

Sanjeev Kumar
Delta Furniture - Hosur, Tamilnadu, India

ANSWER or FOLLOW UP POST an unrelated QUESTION HOT Topics

Disclaimer: It is not possible to diagnose a finishing problem or the hazards of an operation via these pages. All information
presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The
internet is largely anonymous; some names may be fictitious and some recommendations may be deliberately harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: