HOME FAQs BOOKS JOBS: Help Wanted Suggestions you are here: Hotline/Forum => Letter 18073

Zinc nickel reel to reel plating

I would like to plate zinc/nickel in a alkaline bath (for reduced surface stress and good formability) on wire in a reel to reel system is there a bath with a high enough current density to be effective. Is it possible to plate in a reel to reel system with a alkaline bath? What chemistry will do this?

Harvey Pierman
- Bedford Hts., Ohio, USA

+++

Suggest you contact one of ETL's business partners, Shipley (a Rohm & Haas Company). Please contact me for further info.

James L Forand
Electroplating Technologies Ltd. - Coplay, Pennsylvania, USA

ANSWER or FOLLOW UP POST an unrelated QUESTION HOT Topics

Disclaimer: It is not possible to diagnose a finishing problem or the hazards of an operation via these pages. All information
presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The
internet is largely anonymous; some names may be fictitious and some recommendations may be deliberately harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: