HOME FAQs BOOKS JOBS: Help Wanted Suggestions you are here: Hotline/Forum => Letter 17080

How to eliminate the saccharin to the nickel sulfamate baths

Thank you for answer my question about saccharin problems (letter 16892). I did some tests in a little nickel sulfamate tank without saccharin and I made very good shims, without wrinkles and only with a little tensile stress. Now the problem is that I have a big tank, 1700 litres, with 0,87 g/l of saccharin and I only want 0,1 g/l. The question is, how can I eliminate the saccharin to the bath? Is it possible with a active carbon treatment?

Jesús Güell
- Barcelona, Spain

Yes

Trevor Crichton
R&D practical scientist The Pheasantries - Chesham, U.K.

ANSWER or FOLLOW UP POST an unrelated QUESTION HOT Topics

Disclaimer: It is not possible to diagnose a finishing problem or the hazards of an operation via these pages. All information
presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The
internet is largely anonymous; some names may be fictitious and some recommendations may be deliberately harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: