HOME FAQs BOOKS JOBS: Help Wanted Suggestions you are here: Hotline/Forum => Letter 17060

Micro-burr in slots 0,5mm width

We are producing progressive honing Machines. we have to finish a workpiece with a i.d. bore of 19 mm. Inside the bore there are 12 vertical slots - width 0.5mm height 20mm. we are looking for a tool/process/system/idea to remove automatically at the end of our honing process the micro-burr from these slots.

Daniel Diamanti
- Imola, Italy

ANSWER or FOLLOW UP POST an unrelated QUESTION HOT Topics

Disclaimer: It is not possible to diagnose a finishing problem or the hazards of an operation via these pages. All information
presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The
internet is largely anonymous; some names may be fictitious and some recommendations may be deliberately harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: