HOME FAQs BOOKS JOBS: Help Wanted Suggestions you are here: Hotline/Forum => Letter 14092

Teflon recoating

This is probably a question that has been answered many times before but I need to find a company that will recoat some teflon fry pans. One of them is electric. Can anyone help me?

Roberta Meisel
- Fenton, Michigan

Roberta,

This site mainly deals with mainstream industrial platings and coatings. Teflon coating of pans is a specialized niche, and not a common industrial process. Your best bet is to call the manufacturer of the pan.

Tim Neveau
Rochester Hills, Michigan

Many years ago I purchased a spray can of Teflon coating from a hardware store. I sandblasted my waffle iron and followed the directions on the can. It was then baked in my oven and has served me for many years and looks as good as the original one. I haven't been able to find this product again WHY?

John Grafton
- Clermont, Florida

ANSWER or FOLLOW UP POST an unrelated QUESTION HOT Topics

Disclaimer: It is not possible to diagnose a finishing problem or the hazards of an operation via these pages. All information
presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The
internet is largely anonymous; some names may be fictitious and some recommendations may be deliberately harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: