HOME FAQs BOOKS JOBS: Help Wanted Suggestions you are here: Hotline/Forum => Letter 12198

Want to set up Electroplating Unit in Malaysia

September 4, 2009

I am interested in setting up a small size electroplating plant in Kuching,Sarawak for plating vehicle spare parts. Can anybody provide method and process to do electroplating.

Edmond Hii
- Kuching, Sarawak, Malaysia
^- Privately contact this inquirer -^

October 11, 2009

Hi, Edmond. It's certainly very doable, but you must decide what kind of parts you want to plate, and what metal you want to plate them with.

Then you can leaf through a few of the "must-have" plating books, and contact a supplier of plating equipment or plating chemistry.

But you may want to contact a plating consultant, and if you are going to do this, it's always best to do it sooner rather than later because the earliest decisions are usually far more critical than the fine details that come later. Good luck.

Regards,

Ted Mooney, P.E.
finishing.com
Brick, New Jersey

ANSWER or FOLLOW UP POST an unrelated QUESTION HOT Topics

Disclaimer: It is not possible to diagnose a finishing problem or the hazards of an operation via these pages. All information
presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The
internet is largely anonymous; some names may be fictitious and some recommendations may be deliberately harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: