HOME FAQs BOOKS JOBS: Help Wanted Suggestions you are here: Hotline/Forum => Letter 11068

Seeking plating thickness measurement machine

I am looking for an x-ray machine for the measurement of plating thickness on small steel components. I would like to hear from people who are using such machines. I plan to buy a used machine.

Mike Amin
- Fort Mill, South Carolina
^- Sorry! This RFQ is outdated -^

We have a Veeco at our lab in Rock Hill if you would like to try it. I would make one comment on buying a used x-ray machine is that you get a warranty on the tube. If the tube goes you will be out about $5000 to buy and install a new one.

George Shahin
- Rock Hill, South Carolina

ANSWER or FOLLOW UP POST an unrelated QUESTION HOT Topics

Disclaimer: It is not possible to diagnose a finishing problem or the hazards of an operation via these pages. All information
presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The
internet is largely anonymous; some names may be fictitious and some recommendations may be deliberately harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: