HOME FAQs BOOKS JOBS: Help Wanted Suggestions you are here: Hotline/Forum => Letter 11048

Electro Deburring

Tell me about electro deburring.

Bhavesh Patel
- Rajkot, Gujarat, India

As you see from the month and a half of silence following your letter, Mr. Patel, most readers are not interested in investing 10 minutes to answer questions that take 10 seconds to post. Please try to re-cast your inquiry as your own 'real-world' problem, rather than as an abstract flash-card question, and I think people will be happy to help you.

Ted Mooney, P.E.
finishing.com
Brick, New Jersey

Ted,

You should also mention that there are a number of ECD methods, which method to use depends upon what is the desired end result.

AF Kenton
Huntingdon Valley, Pennsylvania

ANSWER or FOLLOW UP POST an unrelated QUESTION HOT Topics

Disclaimer: It is not possible to diagnose a finishing problem or the hazards of an operation via these pages. All information
presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The
internet is largely anonymous; some names may be fictitious and some recommendations may be deliberately harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: