HOME FAQs BOOKS JOBS: Help Wanted Suggestions you are here: Hotline/Forum => Letter 10095

How to do Copper Deposition for plated through holes

I'm building printed circuit boards, for prototyping, but I am looking for how to deposit copper over the copper tracks, and finally building plated trough hole... If somebody could help or give me any useful information.

THANKS,

Roberto de Alba Alvarez
- Guadalajara, Mexico

February 19, 2009

Hi, Roberto. Coombs' "Printed Circuits Handbook" [link is to info about the book at Amazon] is the go-to reference for this and just about anything having to do with fabrication of circuit boards. Good luck.

Regards,

Ted Mooney, P.E.
finishing.com
Brick, New Jersey

ANSWER or FOLLOW UP POST an unrelated QUESTION HOT Topics

Disclaimer: It is not possible to diagnose a finishing problem or the hazards of an operation via these pages. All information
presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The
internet is largely anonymous; some names may be fictitious and some recommendations may be deliberately harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: