HOME FAQs BOOKS JOBS: Help Wanted Suggestions you are here: Hotline/Forum => Letter 130

Seeking technology and equipment for electroforming

-----
I am looking for a transfer of technology and supply of equipment for electroforming. We are a mold and die manufacturer looking for implementation of this technology in our facility. We have the common state of the art manufacturing equipment but need further guidance in tool and die manufacturing particularly in this field. Any information on the matter shall be greatly appreciated. Thanks

We are a die and mold maker and wish to add nickel and copper electroform equipment for use as mold and electrode for plastic molds.
Jimmy Chan

Hi, Jimmy. NiCoForm has demonstrated great ability in nickel and nickel-cobalt electroforming. You might wish to talk to them and see if they can license the information and guidance you are looking for. Good luck.

Regards,

pic of Ted Mooney
Ted Mooney, P.E.
finishing.com
Brick, New Jersey

ANSWER or FOLLOW UP POST an unrelated QUESTION HOT Topics

Disclaimer: It is not possible to diagnose a finishing problem or the hazards of an operation via these pages. All information
presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The
internet is largely anonymous; some names may be fictitious and some recommendations may be deliberately harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: