HOME FAQs BOOKS JOBS: Help Wanted Suggestions you are here: Hotline/Forum => Letter 0023

Need ruthenium plating by any deposition method

-----
I would like to communicate with anyone who is involved with the coating of ruthenium, or other platinum-group metals, onto other substrates. Any technique can be used, such as thermal spraying, electroplating, electroless deposition, etcetera.

Regards
Wayne G [last name deleted for privacy by Editor]
University of the Witwatersrand

Also interested in methods involving Ruthenium electroplating.

Thanks,
David W [last name deleted for privacy by Editor]
USN - Bangor, Washington

++++

Hello, Wayne. "Electroless Plating" by Mallory & Hajdu has a chapter on electroless plating of Platinum Group Metals, including a couple of pages specifically on Ruthenium.

Also, see letters 15711, 49098, and49150 for additional discussions on Ruthenium. Good luck.

Ted Mooney, P.E.
finishing.com
Brick, New Jersey

ANSWER or FOLLOW UP POST an unrelated QUESTION HOT Topics

Disclaimer: It is not possible to diagnose a finishing problem or the hazards of an operation via these pages. All information
presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The
internet is largely anonymous; some names may be fictitious and some recommendations may be deliberately harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: