HOME FAQs BOOKS JOBS: Help Wanted Suggestions you are here: Hotline/Forum => Letter 0013

ELECTROLESS NICKEL (EN) COATINGS for Oil & Gas Industry

-----

Hi,
Please, We would like to know about the updated ELECTROLESS NICKEL COATINGS and its applications repairing equipment' surfaces in the oil and gas industry. We will appreciate your help. Regards.

Dany Di Fazio V. Corpoven, s.a.
PETROLEOS DE VENEZUELA (PDVSA) - Venezuela

Hi, Dany. Thanks for visiting. References you might consider are:

Chemical (Electroless) Nickel Plating by G.G. Gawrilov or Electroless Plating: Fundamentals & Applications by Mallory and Hajdu

You may wish to contact suppliers of electroless nickel solutions, such as:

--or manufacturers of brush plating systems, such as the site's supporting advertisers:

Good luck.

Ted Mooney, P.E.
finishing.com
Brick, New Jersey

Electroless nickel is a coating designated to protect metallic part of any shape against corrosion-erosion in oil industry application, for example, in choke boxes, control valves, spools, pumps, pipes, and others where corrosion and erosion resistance are required to reduce operational cost and extend lifetime of components mentioned above.

José Wong
- Caracas, Venezuela

ANSWER or FOLLOW UP POST an unrelated QUESTION HOT Topics

Disclaimer: It is not possible to diagnose a finishing problem or the hazards of an operation via these pages. All information
presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The
internet is largely anonymous; some names may be fictitious and some recommendations may be deliberately harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: